48A Smart AC Charger (App)

AutoBot charger doesn’t have a circuit breaker built-in. To reduce the risk of fire, make sure to connect your charger to a circuit with a branch circuit overcurrent protection of 125% of the selected max amperage setting of the device in accordance with local codes and ordinances. So if you have the 40A version of AutoBot charger, you’ll need a 50A breaker, and if you have the 48A version, a 60A breaker will be needed.

It is recommended to leave your charger plugged in even when it is not in use. If the charger is powered off, you won’t be able to access the following features:

1. Remote control of the charger via the AutoBot Charge app such as scheduled charging, reminders, remote start.

2. Automatic OTA software update.

3. Energy tracking and records.

This charger uses SAE J1772 connector, so it works with any EV that takes this connector and even Tesla with an adapter.

In order to prevent some models that do not support scheduled charging from entering deep sleep mode during the non-scheduled period and cannot be woken up when it is time for charging, AutoBot smart charger will charge your car to keep it awake at a very low charging rage.